Hot Water System Unexpected Shutdown: Taking the Right Measures
Hot Water System Unexpected Shutdown: Taking the Right Measures
Blog Article
How do you really feel about How to Troubleshoot and Repair an Electric Water Heater?
Many modern residences take advantage of an electrical hot water heater for their heater, as a result of its comfort as well as ease of use. However, similar to any other electric home appliances, problems might emerge with its use, unexpectedly. It can be really frustrating to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't hot sufficient or even too warm. Whatever the situation might be, water heater troubles can be fairly nerve-racking. Fortunately, we have actually made a checklist of possible solutions to your hot water heater problems. There are a variety of aspects that could create most of these troubles, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the problem is, getting it dealt with ought to not pose excessive of an issue if you comply with these steps:
Inspect Your Power Supply:
As basic as this might seem, it is really required. Without ample power, your water heater will certainly not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power problem. Check if the fuse is blown out or the breaker tripped. If the breaker is the concern, just transform it off and on once again. Change any type of busted or worn-out fuse. Check the appliance with power after these modifications to see if it's currently working.
Inspect the Burner in the Water Heater:
If it's not a power trouble, then try taking a look at your heating element if it is still working. Check each of your burner to be sure the problem isn't with any one of them. If any of them is malfunctioning, change that part and after that inspect whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm sufficient, you might need to check the temperature setups on your upper thermostat. Guarantee the breaker is turned off before doing anything. Open up the accessibility panel and press the red switch for temperature level reset above the thermostat. This must help warm the water. Turn the circuit breaker back on as well as examine if the problem has been settled.
Call A Professional:
If after replacing all faulty components as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to an expert plumber for a professional opinion. The problem with your heating unit could be that the cold and hot faucets have been changed or it might be undersized for the amount of hot water required in your house. Whatever the situation might be, a specialist plumber would help resolve the issue.
Verdict
Hot water heater issues are not always major. A lot of them are due to small concerns like a blown fuse or worn-out heating element. Replacing the faulty components need to do the trick. However, if you are still incapable to solve the problem, give a call to your nearest plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our excerpt about How to Troubleshoot and Repair an Electric Water Heater. Thanks so much for taking time to read our piece of content. Do you know anybody else who is involved in the niche? Feel free to share it. Thank-you for your time spent reading it.
Issue resolved, dial! Report this page